Use a flexible measuring tape to measure the circumference of your hand at it’s widest section. Take the measurement in inches.

If your measurement is between:
7 and 8 inches, order “small”
8 and 9 inches, order “medium”
9 and 10 inches, order “large”
10 and 11 inches, order “extra large”

Please note that if you are ordering synthetic or nitrile exam gloves, they tend to run small. You may consider sizing up, if your measurement is on the edge of a range.

Nitrile Gloves as low as $4.99 Per Box
All Sizes Available. Fast shipping!
View our website at http://www.unisafedirect.com

Gloves help keep you safe and healthy! Chemicals in paints can pass through skin and enter your body. Some of these chemicals cause health problems, even in small amounts. To protect yourself, wear chemical-protective gloves every time you handle paint materials, and especially during paint mixing, spraying, and gun cleaning. Painters should also wear chemical-resistant clothing, eye protection, and an appropriate respirator as part of a complete protection program.

How often should painters change their gloves?

When to change gloves depends on the glove type, thickness, and condition of use. It's always best to consult with the glove manufacturer to find out how often gloves should be changed. Before any task, painters should carefully inspect their gloves for cuts, tears, or punctures. Painters should immediately change gloves that show signs of wear!

How can I get more information on chemical-protective gloves?

Talk to glove manufacturers and distributors, listed in most phone directories. These companies offer technical advice—and often free samples—to prospective clients. Your distributor of paints and personal protective equipment might also provide these services.

 Note: This guide provides insights into some of the chemical-protective gloves presently available that may be used by auto refinishers. It is not intended to be used as a glove selection guide.

What is the most important consideration when selecting gloves?

Above all, the gloves you use must provide a protective barrier to the toxic chemicals in paints. Of primary concern are solvents, which typically have the fastest glove pass through times and pose serious health concerns. Solvents also damage your skin, which makes it easier for chemicals such as isocyanates to enter your body. Isocyanates are strong irritants and can cause allergic reactions to the skin and internal organs. Gloves that protect against solvent exposure should provide a barrier to other chemicals as well.

What chemicals should gloves protect against?

Painters need to protect their hands, and other parts of their bodies, from a wide variety of toxic chemicals used in auto refinishing. Thinners, primers, basecoats, and clearcoats all contain dangerous chemical ingredients. The following lists indicate some typical ingredients in paint coatings:

Of course, the chemicals in paint materials vary from one paint manufacturer to the next. Painters and shop owners should refer to the manufacturer's material safety data sheets (MSDSs) for a complete list of product ingredients.

What type of glove makes the most sense for car painters?

Don't make your choice based on price alone! All gloves do not provide the same level of protection. Latex gloves, for example, offer little or no protection because they rapidly degrade after being exposed to many chemicals found in paint materials. Latex gloves are not a good choice for most painting tasks.

Nitrile gloves, in contrast, provide a better barrier to paints and organic solvents—the chemicals that are some of the toughest on gloves. Because they protect well and are durable, nitrile gloves (which cost about $10.00 for a box of 100 pairs) offer good value for your safety dollar. Of course, even nitrile gloves would not provide adequate protection against all chemicals for all tasks.

Certain strong solvents used in paints and for clean-up, like methyl ethyl ketone (MEK), pass through nitrile gloves. Nitrile gloves should not be used for tasks where direct immersion of gloves in MEK lasts longer than a few minutes. Other glove types, like butyl rubber, provide a stronger barrier to MEK and similar chemicals, but these gloves are very expensive and might not offer painters the "feel" they need for most tasks.

Ultimately, shop owners should work with their painters and glove distributors to identify the right gloves: ones that protect against auto refinishing chemicals, fit comfortably, suit the task, and are a good protection value.

Remember: In a paint shop you're exposed to many chemicals that pass through gloves at varying rates. The right glove must protect you from the chemicals that penetrate gloves fastest.

Source: http://www.epa.gov/dfe/pubs/auto/gloves/index.htm

Unisafe Inc. has the Nitrile Gloves you need.
Nitrile Gloves Starting at $4.99 Per Box! Fast Shipping!
View our website at http://www.unisafedirect.com

TopGrip Ultimate Nitrile Gloves

According to UniSafe Inc., Top Grip Ultimate Nitrile gloves are built to stand up where other gloves fail, yet provide the dexterity required for detailed work. Some features and benefits include:

• A proprietary violet-colored formula that actually stretches like latex to offer a comfy fit.
• The ability to use one pair of gloves for an extended period of time, which helps save money.
• A special manufacturing process that leaves extra material in high-stress areas to reduce frustration with torn gloves.
• Superior Strength
• 9.5" Wrist-Covering Glove Length
• Beaded Cuff for Easy Donning
• Textured Fingers for Improved Wet or Dry Grip
• Stretchable Synthetic Nitrile Material for Comfort
• FDA-Inspected Medical Grade
• 100% Powder-Free
• 100% Latex-Free - No Latex Allergens nor Protein Issues

Choose Nitrile Gloves

Nitrile gloves are manufactured using synthetic latex and don't contain any protein so they are less likely to cause irritation and allergic reactions. They are three times more puncture resistant than natural rubber. They offer superior resistance to punctures and abrasions and are also used for protection against a variety of chemicals. Nitrile material also has a naturally low coefficient of friction, making them easy to don (put on).  Below are some of the reasons why nitrile gloves would be chosen over vinyl or latex.

• No Protein Allergen
• Anti Static Behavior
• Good Chemical Resistance
• High Puncture Resistance
• High flexibility
• Solvent Resistant 

Unisafedirect.com offers many varieties of Nitrile Gloves.

• All medical grade gloves have FDA oversight and approval.
• Medical grade gloves are mandatory for anyone coming in contact with blood borne pathogens (blood, urine, saliva, etc.).
• If the box does not say “EXAM”, it is not medical grade.

Industrial Grade Gloves

• A term used to distinguish disposable gloves used for industrial or non-medical purposes. 
• Industrial grade gloves are popular in industrial and food service markets were there are no blood borne pathogen issues.

We recommend the following supplier of gloves:

Unisafe Inc.

• Latex Gloves
• Nitrile Gloves
• Vinyl Gloves